Dental composites with strength after aging improved by using anodic nanoporous fillers: experimental results, modeling, and simulations

Abstract

We fabricated resin composites based on a standard matrix system used for dental restorations incorporating a novel concept microsized fller with passing-through nanopores. The fllers were obtained from anodic porous alumina (APA), after separation from the supporting aluminum substrate and ball milling. Bending tests were carried out on as-cured and artifcially aged composites, to determine the material elastic modulus and its strength for the frst time. A two-scale modeling was developed; at micro scale, a fnite element (FE) model of the representative volume element (RVE) including single APA and surrounding polymer was constructed. The infuence of embedded APA length and APA–matrix interaction on the strength was investigated. Then, FE model of the macro-scale RVE containing numerous APA with diferent orientations based on stochastic modeling was constructed. The output of micro-scale model was used as the input of macro-scale model. The results of simulations allowed to understand better the behavior of the novel composite and interpret the material response deviations from those of common three-phases composites, and to validate the experimental results. The strength of the experimental composite is lower than those of commercial composites used for the same application when as-cured, but is higher after aging.